*******************2K_XP************************************
*
*
*  Alpha/Beta/Production Candidate Releases
* 
* 
*  
*  Microsoft Windows* 2000                                                       
*  Microsoft Windows* XP                                                         
*  Driver Revision: 6.14.10.3737

*  Package: 18331
*
*  Alpha 14.3.0.3737                                                             
*
*
*  December 23, 2003
*
*  NOTE:  This document refers to systems containing the 
*         following Intel chipsets: 
*
*	 Grantsdale-G Chipset                               
*	
*	                               
*	
*  Installation Information
*
*  This document makes references to products developed by
*  Intel. There are some restrictions on how these products
*  may be used, and what information may be disclosed to
*  others. Please read the Disclaimer section and contact
*  your Intel field representative if you would like more
*  information.
*
************************************************************
************************************************************
*  DISCLAIMER: Intel is making no claims of usability,
*  efficacy or warranty.  The INTEL SOFTWARE LICENSE
*  AGREEMENT contained herein completely defines the license
*  and use of this software.
*
*  This document contains information on products in the 
*  design phase of development. The information here is 
*  subject to change without notice. Do not finalize a 
*  design with this information.
************************************************************
************************************************************

************************************************************
*  CONTENTS OF THIS DOCUMENT
************************************************************

This document contains the following sections:

1.  System Requirements
2.  Localized Language Abbreviations
3.  Installing the Software
4.  Verifying Installation of the Software
5.  Identifying the Software Version Number
6.  Uninstalling the Software
7.  Installation Switches Available

************************************************************
* 1.  SYSTEM REQUIREMENTS
************************************************************

1.  The system must contain one of the following Intel
    Chipsets:

 	 Grantsdale-G Chipset                               
 	
 	                            	

2.  The software should be installed on systems with at
    least 128 MB of system memory.

3.  There should be sufficient hard disk space in the <TEMP>
    directory on the system in order to install this
    software.

    The drivers included with this distribution package are
    designed to function with all released versions of
    Microsoft Windows* 2000 and Microsoft Windows* XP.

Please check with your system provider to determine the
operating system and Intel Chipset used in your system.

************************************************************
* 2.  LOCALIZED LANGUAGE ABBREVIATIONS
************************************************************

The following list contains the abbreviations of all
languages into which the driver has been localized. You may
have to refer to this section while using this document.

ara -> Arabic - Saudi Arabian
arb -> Arabic - Lebanon
chs -> Mainland Chinese
cht -> Traditional Chinese
csy -> Czechoslovakian
dan -> Danish
deu -> German
ell -> Greek
eng -> International English
enu -> English
esp -> Spanish
fin -> Finnish
fra -> French
frc -> French Canadian
heb -> Hebrew
hun -> Hungarian
ita -> Italian
jpn -> Japanese
kor -> Korean
nld -> Dutch
nor -> Norwegian
plk -> Polish
ptb -> Brazilian Portuguese
ptg -> Portuguese
rus -> Russian
sve -> Swedish
tha -> Thai
trk -> Turkish

************************************************************
* 3.  INSTALLING THE SOFTWARE
************************************************************

General Installation Notes:

1.  The operating system must be installed prior to the
    installation of the driver.

2.  This installation procedure is specific only to the 
    version of driver and installation file included in this
    release.
3.  This procedure assumes that all of the software
    associated with this release is located in the same
    directory.



MANUAL "HAVE-DISK" INSTALLATION INSTRUCTIONS
--------------------------------------------

To install from a Web download, you will download either a ZIP file or an EXE file from the Web.

a. If it is an EXE file, double-click the file you downloaded and specify a 
   location into which the  driver files will be extracted. Click "Unzip" and          
   the files will extract. Click "OK" on the next window, then click "Close". 

b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or   
   PKZip*. 
      

Microsoft Windows* 2000 Installation Instructions
-------------------------------------------------

1.  Right click on "My Computer" icon and then click on "properties".

2.  Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING
    DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)

3b. Double click "Display adapters". Double click on the graphics controller shown.

4.  Click on "driver" tab and select "Update Driver".

5.  Click on the "Next" button.

6.  Select the following option: "Display a list of the known
    drivers for this device...". Click on the "Next" button.
    (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the "Browse"
    button.

9.  Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Next enter the
    "Win2000" subdirectory. Highlight the "ialmnt5.INF"
    file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will install the driver.
    Click on the "Finish" button when done.

12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded. 
    

To determine if the driver has been loaded correctly, refer to the Verifying Installation section below.



Microsoft Windows* XP Installation Instructions 
-----------------------------------------------

1.  Click "Start" then right click on "My Computer" icon and then click on   
    properties.

2.  Click on "Hardware" Tab and select "device manager". (NOTE: IF UPDATING    
    DRIVER GO TO STEP 3B)

3a. Double click "Video Controller (VGA Compatible)". (Go To STEP 4)

3b. Select "Display adapters" then Double click on the graphics controller 
    shown.  

4.  Click on "driver" tab and select "Update Driver".

5.  Select the following option: "Install from a list or
    specific location (Advanced)". Click on the "Next" button.

6.  Select the following option: "Don't search.  I will choose the driver to  
    install".  Click on the "Next" button. 
    (NOTE: IF UPDATING DRIVER GO TO STEP 8)

7.  Select "Display adapters". Click on the "Next" button.

8.  Click on the "Have Disk..." button and then the "Browse"
    button.

9.  Enter the directory where you unzipped the file you downloaded,
    and then enter the "Graphics" subdirectory. Next enter the
    "Win2000" subdirectory. Highlight the "ialmnt5.INF"
    file. Click on the "Open" button. 

10. Click on the "OK" button. A window listing all of the
    available display types should open. Select the display
    adapter that your system contains and then click on the
    "Next" button. 

11. Click on the "Next" button. The operating system will install the driver.
    Click on the "Finish" button when done.

12. Click on the "Close" button and then click on the "Yes"
    button to reboot. The driver should now be loaded. 

To determine if the driver has been loaded correctly, refer to the Verifying Installation 
section below.


AUTOMATED INSTALL USING SETUP.EXE
---------------------------------

1. To install from a Web download, you will download either a ZIP file or an EXE file from the Web.

   a. If it is an EXE file, double-click the file you downloaded and specify a 
      location into which the  driver files will be extracted. Click "Unzip" and          
      the files will extract. Click "OK" on the next window, then click "Close". 

   b. If it is a ZIP file, you must unzip it using a utility such as WinZip* or   
      PKZip*. 

2. Click the 'Start' button in the task bar, click 'Run' and then select 'Setup.exe' from 
   the hard drive directory where the driver files are stored.  The Install dialog will appear.

3. click 'Next' to continue.  

4. Read License Agreement and click Yes to proceed.
 
5. When the 'Setup COMPLETE' message appears click 'Finish' to restart your computer.

Setup install switches are listed in section 7 below.  


************************************************************
* 4.  VERIFYING INSTALLATION OF THE SOFTWARE
************************************************************
1.  Double Click on the "My Computer" icon, then double click on the
    "Control Panel" icon, and then double click on the "System"
    icon.

2.  Click on "Hardware" Tab and select "device manager". Click on the
    "Display Adapters" icon. The Intel Graphics Driver
    should be listed.  If not, the driver is not installed
    correctly. To check the version of the driver, refer to
    the section below.

************************************************************
* 5.  IDENTIFYING THE SOFTWARE VERSION NUMBER
************************************************************

1.  Double Click on the "My Computer" icon, then double click on the
    "Control Panel" icon, and then double click on the "Display"
    icon.

2.  Select the "Settings" tab and then click on the
    "Advanced" button.

3.  Select the "Intel(R) Extreme Graphics" tab. The
    graphics driver version should be listed on this screen.

************************************************************
* 6.  UNINSTALLING THE SOFTWARE
************************************************************

NOTE: This procedure assumes the above installation process
was successful. This uninstallation procedure is specific
only to the version of the driver and installation files
included in this package.

1.  Click on the "My Computer" icon, then click on the
    "Control Panel" icon, and then click on the "Add/Remove
    Programs" icon.

2.  Select Intel(R) Extreme Graphics Driver Software

3.  Click the "Remove" button to uninstall the driver. 

************************************************************
* 7.  INSTALLATION SWITCHES AVAILABLE
************************************************************

The switches in the SETUP.EXE file will have the following
syntax. Switches are not case sensitive and may be
specified in any order (except for the -s switch). Switches
must be separated by spaces.

SETUP [-b] [-g{xx[x]}] [-overwrite][-nolic] 
[-bits x x_pixels x y_pixels x vert_refresh]
[-l{lang_value}] [-s] [-f2<path\logfile>]

GFX-INSTALL CUSTOM SWITCHES

-b  Forces a system reboot after the installation completes.
In non-silent mode, the absence of this switch will prompt
the user to reboot. In silent mode, the absence of this
switch forces the Setup.exe to complete without rebooting
(the user must manually reboot to conclude the installation
process).

-g{xx[x]}  Forces the configuration of a specific language
version of the driver during the install.  The absence of
this switch will cause the installation to utilize the
language of the OS locale as its default.

-overwrite  Installs the graphics driver regardless of the
version of previously installed driver.  In non-silent mode,
the absence of this switch will prompt the user to confirm
overwrite of a newer Intel Graphics driver. In silent mode,
the absence of this switch means that the installation will
abort any attempts to regress the revision of the Intel(R)
Extreme Graphics driver.

-nolic	Suppresses the display of the license agreement
screen. In non-silent mode, the absence of this switch will
only prompt the user to view and accept the license
agreement. The functionality of this switch is automatically
included during silent installations.

-[bits per pixels] x [x_pixels] x [y_pixels] x [vert_refresh].  
Sets the four default display parameters: bits per pixel, pixels 
per line,pixels per column and vertical refresh rate. 
For example:  If you want 16 bits per pixel, 1024 pixels per line, 
768 pixels per column and a vertical refresh rate of 75Hz, you would 
input the follow at the command line "-16x1024x768x75".



INSTALLSHIELD* STANDARD SWITCHES

-l{lang_value}  The switch provided by InstallShield*
specifies the language used for the Gfx-Install user
interface. The absence of this switch will cause the
installation to utilize the language of the OS as its
default. Detailed requirements for the Install Dialog
language settings are given in the Install Dialog Language
section.

-s  Run in silent mode. The absence of this switch causes
the install to be performed in verbose mode.

-f2<path\logfile>  Specifies an alternate location and name
of the log file created by a silent install. By default,
Setup.log log file is created and stored during a silent
install in the same directory as that of Setup.ins.

************************************************************
* INTEL SOFTWARE LICENSE AGREEMENT
*   (Alpha/Beta, Organizational Use)
************************************************************
IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. 

Do not use or load this software and any associated materials 
(collectively, the "Software") until you have carefully read 
the following terms and conditions. By loading or using the 
Software, you agree to the terms of this Agreement. If you 
do not wish to so agree, do not install or use the Software.

The Software contains pre-release "alpha" or "beta" code,
 which may not be fully functional and which Intel Corporation 
("Intel") may substantially modify in producing any "final"
version of the Software.  Intel can provide no assurance that 
it will ever produce or make generally available a "final" 
version of this Software.

LICENSE. This Software is licensed for use only in 
conjunction with Intel component products.  Use of the 
Software in conjunction with non-Intel component products is 
not licensed hereunder. You may copy the Software onto your 
organization's computers for your organization's use in testing
and evaluating the software only, and you may make 
a reasonable number of back-up copies of the Software, 
subject to these conditions: 
	1. You may not copy, modify, rent, sell, distribute 
	   or transfer any part of the Software, except as 
           provided in this Agreement, and you agree to 
	   prevent unauthorized copying of the Software.
	2. You may not reverse engineer, decompile or 
           disassemble the Software. 
	3. You may not sublicense the Software.
	4. The Software may contain the software or other 
	   property of third party suppliers, some of which 
	   may be identified in, and licensed in accordance 
	   with, an enclosed "license.txt" file or other text 
	   or file. 

OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of 
the Software remains with Intel or its suppliers. The Software 
is copyrighted and protected by the laws of the United States 
and other countries, and international treaty provisions. You 
may not remove any copyright notices from the Software.  Intel 
may make changes to the Software, or to items referenced therein,
 at any time and without notice, but is not obligated to support 
or update the Software. Except as otherwise expressly provided, 
Intel grants no express or implied right under Intel patents, 
copyrights, trademarks or other intellectual property rights. 
You may transfer the Software only if the recipient agrees to 
be fully bound by these terms and if you retain no copies of 
the Software.

LIMITED MEDIA WARRANTY.  If the Software has been delivered by 
Intel on physical media, Intel warrants the media to be free 
from material physical defects for a period of (90) ninety days
 after delivery by Intel. If such a defect is found, return the 
media to Intel for replacement or alternate delivery of the 
Software, as Intel may select.

EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, 
THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR 
IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF
MERCHANTABILITY, NONINFRINGEMENT OR FITNESS FOR A PARTICULAR 
PURPOSE.  Intel does not warrant or assume responsibility for 
the accuracy or completeness of any information, text, graphics, 
links or other items contained within the Software.

LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS 
BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, 
LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING 
OUT OF THE USE OF OR THE INABILITY TO USE THE SOFTWARE, EVEN IF 
INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME 
JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR 
IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE 
ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER 
LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. 

TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement
 at any time if you violate its terms. Upon termination, you will 
immediately destroy the Software or return all copies of the 
Software to Intel.
 
APPLICABLE LAWS. Claims arising under this Agreement shall be 
governed by the laws of California, excluding its principles of 
conflict of laws and the United Nations Convention on Contracts 
for the Sale of Goods. You may not export the Software in violation 
of applicable export laws and regulations. Intel is not obligated
under any other agreements, unless they are in writing and signed 
by an authorized representative of Intel.

GOVERNMENT RESTRICTED RIGHTS. The Software is provided with 
"RESTRICTED RIGHTS." Use, duplication or disclosure by the 
Government is subject to restrictions as set forth in 
FAR52.227-14 and DFAR252.227-7013 et seq. or their successors.
Use of the Software by the Government constitutes acknowledgment 
of Intel's proprietary rights therein. Contractor or Manufacturer 
is Intel Corporation, 2200 Mission College Blvd., 
Santa Clara, CA 95052.

 
SLA-ALPHABETA-ORG./RBK/January 21, 2000
************************************************************
************************************************************
Information in this document is provided in connection with
Intel products. Except as expressly stated in the INTEL
SOFTWARE LICENSE AGREEMENT contained herein, no license,
express or implied, by estoppel or otherwise, to any
intellectual property rights is granted by this document.
Except as provided in Intel's Terms and Conditions of Sale
for such products, Intel assumes no liability whatsoever,
and Intel disclaims any express or implied warranty,
relating to sale and/or use of Intel products, including
liability or warranties relating to fitness for a particular
purpose, merchantability or infringement of any patent,
copyright or other intellectual property right. Intel
products are not intended for use in medical, lifesaving,
or life-sustaining applications.

************************************************************
* Intel Corporation disclaims all warranties and liabilities
* for the use of this document, the software and the
* information contained herein, and assumes no
* responsibility for any errors which may appear in this
* document or the software, nor does Intel make a commitment
* to update the information or software contained herein.
* Intel reserves the right to make changes to this document
* or software at any time, without notice.
************************************************************

* Other names and brands may be claimed as the property of others.

Copyright (c) Intel Corporation, 2001-2003
